The drawing is indicative and the proportions may not correspond to the table or real dimensions.
IP 67 - "IP-STOP LIGHT" - (FOR METRIC HOLE)
Material: Halogen-free EPDM.
Color: light gray Ral 7035, dark gray Ral 7001, black Ral 9005.
Use temperature: -40°C / +110°C
Features: these cable glands exert a discreet anti-traction seal and, above all, ensure an IP 67 seal both on the 2 holes of the cable gland itself and on the wall mounting hole. They have a conical shape whose cone is blocked by a thin membrane. For correct installation, the cable glands must be mounted in the wall hole in the direction of the cone, but, depending on the application, they can be mounted on both sides of the wall so that the cone or the flat base can be seen externally. . Subsequently, the cable is introduced from the side with the open hole and pushed until the membrane breaks and comes out of the cone; finally, the cable must be pulled in the opposite direction by approx. 1 cm. No tools are needed. The "IP-STOP LIGHT" cable glands have the same characteristics as the "IP-STOP" cable glands, but are produced with a slightly lower thickness of material. This gives the cable glands greater softness and malleability which allow faster assembly and, consequently, considerable time savings in mass production. For this, they are offered to manufacturers of lamps and lighting systems. They are made of EPDM which offers good resistance to atmospheric agents and diluted acids and excellent resistance to UV rays and ozone. Please note that these grommets also contain sulfur particles which could potentially have a negative effect on the LEDs.
IP protection: IP 67 according to EN 60529 specifications.
Regulations and Certifications: they comply with the SEMKO regulation.
Color: light gray Ral 7035, dark gray Ral 7001, black Ral 9005.
Use temperature: -40°C / +110°C
Features: these cable glands exert a discreet anti-traction seal and, above all, ensure an IP 67 seal both on the 2 holes of the cable gland itself and on the wall mounting hole. They have a conical shape whose cone is blocked by a thin membrane. For correct installation, the cable glands must be mounted in the wall hole in the direction of the cone, but, depending on the application, they can be mounted on both sides of the wall so that the cone or the flat base can be seen externally. . Subsequently, the cable is introduced from the side with the open hole and pushed until the membrane breaks and comes out of the cone; finally, the cable must be pulled in the opposite direction by approx. 1 cm. No tools are needed. The "IP-STOP LIGHT" cable glands have the same characteristics as the "IP-STOP" cable glands, but are produced with a slightly lower thickness of material. This gives the cable glands greater softness and malleability which allow faster assembly and, consequently, considerable time savings in mass production. For this, they are offered to manufacturers of lamps and lighting systems. They are made of EPDM which offers good resistance to atmospheric agents and diluted acids and excellent resistance to UV rays and ozone. Please note that these grommets also contain sulfur particles which could potentially have a negative effect on the LEDs.
IP protection: IP 67 according to EN 60529 specifications.
Regulations and Certifications: they comply with the SEMKO regulation.